FEMA offers 2-way, 3-way, 4-way, latching, sump-mount, cartridge-style, and pilot solenoids.
Technical Specifications
FEMA custom designs and develops products to specific customer needs. Our small efficient integrated coil allows introduction of these units into smaller areas. The following specifications are intended as examples. Please contact us with your application to learn more about our capabilities.
3-Way Valve
FEMA custom designs and develops products to specific customer needs. The following specifications are intended as examples. Please contact us with your application to learn more about our capabilities.
Physical Dimensions:
Overall Height: 104 mm
Coil Diameter: 33 mm
Cavity: Industry Standard
Hydraulic Requirements:
Valve Type: 2 position, 3-way, normally closed solenoid cartridge valve
Operational Temperature (Oil): -40 °C to 100 °C
Supply Pressure: 30 bar and higher – Contact Us
Flow (58 cst [40°C]):
• Flow from S to C and C to T is 0.3 L/sec at 500 kPa
Leakage (58 cst [40°C]):
• Maximum leakage is 0.02 L/min at 1750 kPa with valve in open or closed position
Electrical Requirements:
Continuous Duty: Capable of operating continuous duty with 9 to 16 Volts
4-Way Valve
FEMA custom designs and develops products to specific customer needs. The following specifications are intended as examples. Please contact us with your application to learn more about our capabilities.
Physical Dimensions:
Overall Height: 120 mm
Coil Diameter: 33 mm
Hydraulic Requirements:
Valve Type: 2 position, 4-way, normally closed solenoid cartridge valve
Operational Temperature (Oil): -40 °C to 100 °C
Supply Pressure: 30 bar and higher – Contact Us
Flow (58 cst [40°C]):
• Flow from S to C and C to T is 0.3 L/sec at 500 kPa
Leakage (58 cst [40°C]):
• Maximum leakage is 0.02 L/min at 1750 kPa with valve in open or closed position
Electrical Requirements:
Continuous Duty: Capable of operating continuous duty with 9 to 16 Volts.
